Cineroid EVF4L Manuel d'utilisateur télécharger pdf (Page 36)

KineRAW-S35

- user manual -

9. TROUBLESHOOTING

All the conditions below are not necessarily a malfunction of the camera; they might result from wrong

operation.

9.1 The camera does not boot

Please make sure the camera is attached to an adequate power source.

a) KineRAW-S35™ has a 4-pin XLR power input. The input supports 14.4/14.8V

b) The AC adapter has an output of 12V/7.5A with XLR-4 pin and can supply the camera

directly.

c) When using a battery pinch make sure it supports the required power output. A 12V output

might not be enough to boot the camera.

9.2 The camera does not record after pressing the REC button

a) Double-check your SSD management. A card with sufficient vacant memory space must be

inserted and the slot must be activated.

PLEASE NOTE

Recording stops automatically when there is not enough memory space left.

9.3 Pixel appear in LIVE VIEW MODE or during recording

a) Press the PLAYBACK BUTTON to enter the PLAYBACK MODE. Press the button again to

return to LIVE VIEW MODE. The pixel should be gone.

b) Restart the camera in case the problem reoccurs.

c) Check the OPERATION TEMPERATURE and confirm that it is below 85 °C.

d) Please contact support if the temperature is below 85 °C and the problem does not

disappear.

9.4 Pixel appear on the monitoring device

a) Please make sure you are using and EVF or monitor approved by Kinefinity.

b) Double check if your monitoring device supports 1080p. If not try to set the LIVE VIEW

resolution to 720p.

WWW.KINEFINITY.TV

1 2 ... 31 32 33 34 35 36 37 38

Pas de commentaire

Cineroid EVF4L Manuel d'utilisateur Page 36